Installation instructions:

The appropriate substructure must be selected depending on the terrace boards/planks to be processed.

• Recommended installation spacing of the substructure 50-60 cm = approx. 35 screws per m¬≤
• Each support point of the planks on the substructure must be fixed with two screws
• The recommended joint spacing of the planks is 4-7 mm depending on the type of wood

Important processing instructions:

Depending on the density and moisture level of the wood, pre-drilling the wood may be necessary. It is recommended to screw in the stainless steel A2 terrace screw at a low speed. Preliminary tests are generally required. In order to achieve a perfect processing result, the wood to be laid should have a moisture content of 16% +/- 2%.

For an absolutely perfect laying appearance, we recommend countersinking the drill holes with our drill with countersink bit (item no. 181 900 009 75 or 181 900 000 75).

Areas of application:

Due to its high resistance to weather influences, the A2 stainless steel terrace screw is used for fastening terraces and floor coverings outdoors. It creates a perfect connection and is particularly suitable for medium and hard woods (e.g. Bangkirai, Bilinga, Cambura, Douglas fir, Garapa, Jatoba, Siberian larch, Red Balau).

The user is responsible for the design.

• Questions about the article?
• Hersteller