Dovetail panels 1220 x 630 mm vz

The panels are S-shaped rolled dovetail steel sheets. They serve as formwork and reinforcement for holding a concrete C20/25 casting compound or cement screed C20/F4 on wood or steel support structures. With a construction height of just 50 mm you get a very load-bearing floor. Alternative casting compounds must have corresponding compressive and flexural strengths. Please note the approval. The profile has an optimized S-shaped geometry, which makes the panel particularly rigid and the cooperation between the dovetail plate and the casting compound ensures the highest possible load-bearing capacity.

Properties:

• Building authority approval [No. Z-26.1-36]
• Can be used for beam spacings of up to 1,500 mm
• High durability through the use of quality-controlled, galvanized wide strip steel
• High-quality floors with a service life of several decades
• Formwork and reinforcement in one operation
• Traffic loads of up to 5.0 kN/m2 possible with correspondingly high point loads
• Simple processing thanks to the special profile
• Can be laid directly on the supporting structure, the old floorboards can be omitted
• The profile ensures sufficient ventilation of the substructure
• Dependent weight including casting compound approx. 90 kg/m2 [approx. 0.9 kN/m2], with a standard structure of 50 mm
• Safe use of the surface coverings, even large-format ceramic tiles
• Fire resistance of 60 ‚Äì 120 minutes can be achieved
• Airborne and impact sound insulation values according to DIN 4109 and improved impact sound protection can be achieved
• Water-resistant floors
• Proven for more than 80 years

Application options:

• Floor renovation in old buildings, attic conversions,
• conversion of buildings, new buildings with steel or
• wooden beam constructions.
• Floors separating apartments with corresponding sound and fire protection values.
• Water-resistant floors with ceramic coverings on
• wooden beam constructions for wet rooms and kitchens.
• Underfloor heating on wooden beam constructions.
• Floors with increased Traffic loads.
• Special constructions such as stage construction, galleries,
• Terraces, balconies etc.
• Composite construction to stiffen the wooden beams
• Support plate for underfloor heating [floor, wall, ceiling]

Artikelart:	Schwalbenschwanzplatte
Breite in mm:	630
Flanschbreite in mm:	39/35
Gewicht in kg:	5,8 pro qm
Hersteller:	Spillner
Länge in mm:	1220
Profilhöhe in mm:	16
Stahldicke in mm:	0,5

• Questions about the article?
• CE-Kennzeichen
• Hersteller
• Produktinformation
• Technische Daten