Installation instructions:

Installation must be carried out in accordance with the approval!

• Create a drill hole
• Clean the drill hole
• Place and screw in the concrete screw
• For final anchoring of the concrete screw,
• tighten with an impulse screwdriver or by hand

Areas of application:

The concrete screw is suitable for fastenings in the medium and heavy load range: Anchoring with European Technical Approval in cracked concrete (concrete tension zone) and in non-cracked concrete (concrete compression zone).

In damp rooms and outdoors, rust-proof materials must be used for fastening (DIN 18360, Chapter 3.1.4.1).

The following applies to fastenings with the concrete screw:

The anchor, with European Technical Approval, may only be used for Anchoring in reinforced or unreinforced normal concrete of strength class C20/25 and C50/60 or higher according to EN 206-1:2000-12

The anchor is only suitable for anchoring under static (e.g. dead weight, equipment, storage materials) or quasi-static (e.g. facade, railing) loads

The concrete screw may only be used under dry interior conditions

Can be used for fastening facades, window elements, railings, cable trays, brackets, ladders, metal profiles, pipelines, crash barriers, gates and temporary fastenings of construction site equipment (e.g. building supports, scaffolding or fall protection)

• Questions about the article?
• Hersteller