Installation instructions:

Through-hole installation

• Create and clean the drill hole
• Insert the anchor through the component into the drill hole
• Drive the pin in flush
• Check the processing result

Installation must be carried out in accordance with the approval!

Areas of application:

The use of the ceiling nail is limited to the multiple fastening of non-load-bearing systems in concrete: Anchoring with European Technical Approval in cracked concrete (concrete tension zone) and in non-cracked concrete (concrete compression zone).

The following therefore applies to fastenings with the ceiling nail:

The anchor may, with European Technical Approval, be used in reinforced or unreinforced normal concrete of strength class of at least C20/25 and at most C50/60 according to EN 206-1:2000-12

the ceiling nail may only be used under dry interior conditions

suitable for anchoring under predominantly static (e.g. dead weight, equipment, storage materials) or quasi-static (e.g. facade, railing) loads

can be used for fastening light ceiling coverings and suspended ceilings, metal profiles, perforated strips, vernier hangers, wooden strips, wooden battens, squared timbers, etc.

• Questions about the article?
• Hersteller