Knauf flowing screed FE 25
Fast setting calcium sulphate flowing screed CAF-C30-F6

Knauf Fließestrich FE 25 A tempo is a ready-mixed dry mortar based on calcium sulphate, which is mixed with pure water.
It consists of special gypsum, superplasticiser and aggregates (0-4 mm).

Properties:Calcium sulphate bonded Ideal for underfloor heating High thermal conductivity Self-levelling Very low shrinkage and tension Very early load-bearing capacity Short drying time as heating screed No sintered layer Flat surface Low-joint surfaces Can be applied by machine Controlled, uniformly good qualityArea of application:Knauf FE 25 A tempo is used as a self-levelling bonded screed, screed on a separating layer or insulating layer or as a heating screed with high compressive strength. as a heating screed with high compressive strength (> 30 N/mm²) and flexural strength (> 6 N/mm²) in service condition Can be dried immediately after pouring (immediate heating when used as a heating screed) Short drying times enable early covering and faster room utilisation The ideal screed for construction sites with tight deadlines (fast readiness for covering) and for floors with higher strength requirements (e.g. schools, commercial premises)

Manufacturer "Knauf Gips KG"

Knauf Gips KG

Am Bahnhof 7
97346
Iphofen D
09323/31-0
zentrale@knauf.com

More products from Knauf Gips KG

Accessible after approx. from (h):	3
Article type:	Flowing screed
Article type Mortar:	Flowing screed
Brand:	Knauf
Consumption per m² per mm layer thickness of (kg):	1.9
Content (kg):	40
Danger:	GHS05
Field of application:	Inside
Grain size from (mm):	0
Grain size up to (mm):	4
Hazard:	H315,H318
Layer thickness of (mm):	25
Manufacturer:	Knauf Gypsum
Resilient after (day):	.3