Knauf flowing screed FE 50 Largo
Calcium sulphate flowing screed CAF-C25-F5

Knauf Fließestrich FE 50 Largo is a ready-mixed dry mortar based on calcium sulphate, which is mixed with pure water.
It consists of anhydrite, special gypsum, superplasticiser and aggregates (0-4 mm), such as granular natural anhydrite or quartz sand.

Properties:High thermal conductivity Can be applied by machine High laying performance Self-levelling Very low shrinkage and tension Early load-bearing capacity No sintered layer Flat surface Low-joint surfaces Controlled, uniformly good quality For interioruse Application area:Knauf flowing screed FE 50 Largo is the ideal screed for single-family homes, terraced houses, multi-storey residential and office buildings, as a

floating screed, nominal thickness = 35 mm
Heated screed, nominal thickness = 35 mm over heating element
Screed on separating layer, nominal thickness = 30 mm
Bonded screed, nominal thickness = 25 mm

Manufacturer "Knauf Gips KG"

Knauf Gips KG

Am Bahnhof 7
97346
Iphofen D
09323/31-0
zentrale@knauf.com

More products from Knauf Gips KG

Accessible after approx. from (h):	24
Article type:	Flowing screed
Article type Mortar:	Flowing screed
Brand:	Knauf
Consumption per m² per mm layer thickness of (kg):	1.9
Content (kg):	40
Danger:	GHS05
Field of application:	Inside
Grain size from (mm):	0
Grain size up to (mm):	4
Hazard:	H315,H318
Layer thickness of (mm):	25
Manufacturer:	Knauf Gypsum
Resilient after (day):	3