Knauf N320 Flex floor levelling compound
Fibre-reinforced, cementitious floor levelling compound from 3 to 20 mm

N 320 Flex is a fibre-reinforced dry mortar made of special cements, selected aggregates and additives to improve the processing properties, premixed ready for mixing. Cementitious mortar type CT-C25-F5 according to EN 13813.

Properties:

Ideal for wooden substrates and critical substrates
Fibre-reinforced
Can be applied in one application from 3 to 20 mm layer thickness
Very low emission, EMICODE EC 1PLUS R
Very good levelling
Rapid hydraulic hardening
Low stress
Suitable for use on heated screeds
Can be applied by machine and pumped
For interior use

Area of application:

As a compound leveller on load-bearing wooden substrates, such as wooden floorboards, parquet, chipboard (V 100 and others), bare concrete floors and calcium sulphate and cement screeds
For creating smooth, seamless floor surfaces, levelling floor unevenness and deviations from dimensional tolerances in accordance with DIN 18202 before laying ceramic tiles and slabs, marble and natural stone coverings, resilient coverings, carpets, parquet and laminate. For full-surface levelling under parquet, the layer thickness must be at least 3 mm
For levelling on properly sanded mastic asphalt surfaces of quality classes IC10 and IC15 up to a layer thickness of 5 mm.

Manufacturer "Knauf Gips KG"

Knauf Gips KG

Am Bahnhof 7
97346
Iphofen D
09323/31-0
zentrale@knauf.com

More products from Knauf Gips KG

Accessible after approx. from (h):	3
Application area spatula:	Floor
Article type:	Floor levelling compound
Brand:	Knauf
Consumption:	approx. 1.6 kg/m²
Consumption note:	per mm layer thickness
Content (kg):	25
Danger:	GHS05
Field of application:	Inside
Filler finish:	Floor levelling compound
Hazard:	H315,H318
Layer thickness of (mm):	3
Layer thickness up to (mm):	20
Manufacturer:	Knauf Gypsum
Processing time to (min):	30
Series:	N 320 Flex
Shelf life:	approx. 9 months
Type of spatula:	Powder filler