Knauf Sockel-SM Pro
Adhesive, reinforcing mortar and finishing render with integrated moisture protection especially for the plinth area

System-tested, mineral adhesive, reinforcing mortar and finishing render for the plinth area. With a total render thickness of = 7 mm, no additional moisture protection is required.

Properties:

Normal plaster mortar GP according to EN 998-1
Compressive strength category CS IV according to EN 998-1
Mortar group P III according to DIN V 18550
For interior and exterior use
Integrated moisture protection
Capillary non-conductive
Sealing, fibre and bonding additive
Can be applied by machine or by hand
Grain size 1.0 mm
Colour grey

Area of application:

The integrated protection against ground moisture and the special fibre reinforcement offer maximum safety in the plinth area
- As reinforcing mortar and finishing render (total render thickness = 7 mm) for the plinth and areas in contact with the ground without additional moisture protection
- As an adhesive mortar on bituminous building waterproofing
- To be used as an adhesive mortar where non-capillary conductive adhesive mortars must be used (e.g. with perimeter insulation boards provided on site)
- As system-tested adhesive and reinforcing mortar and finishing render in the plinth area for WARM-WAND systems
- Tested as a sealant for floor slabs in contact with the ground and external wall surfaces against ground moisture (capillary water, adhesive water) and non-accumulating seepage water in accordance with DIN 18195-4

Manufacturer "Knauf Gips KG"

Knauf Gips KG

Am Bahnhof 7
97346
Iphofen D
09323/31-0
zentrale@knauf.com

More products from Knauf Gips KG

Article type:	Bonding, reinforcing and renovation mortar
Article type Mortar:	Adhesive & reinforcing mortar
Brand:	Knauf
Colour:	grey
Compressive strength:	CS IV
Consumption per m² of (kg):	4.0
Consumption per m² up to (kg):	11.0
Content (kg):	30.0
Danger:	GHS05, GHS07
Field of application:	Inside & outside
Grain size from (mm):	0.0
Grain size up to (mm):	1.0
Hazard:	H318,H315,H335
Manufacturer:	Knauf Gypsum
Model:	SM Pro
Mortar type:	Reinforcing mortar, adhesive mortar
Processing mortar & plaster:	by machine & by hand
Suitable for mortar & plaster:	Wall