Deformable thin-bed mortar for natural stone coverings

Areas of application:

Product property:

Corresponds to C2FT S1 according to DIN EN 12 004 and "Guideline for flexible mortar".
For laying calibrated natural stone, especially white marble, using the thin-bed method.
Water and frost resistant.
Very low emission, GEV EMICODE EC 1 PLUS.
Adhesive bed thickness: 2 to 10 mm.

Consumption approx:
see consumption table

Manufacturer "PCI Augsburg GmbH"

PCI Augsburg GmbH

Piccardstrasse 11
86159
Augsburg D
0821/5901-0
pci-info@pci-group.eu

Adhesive bed thickness of (mm):	2
Adhesive bed thickness up to (mm):	10
Area of application Tile & natural stone laying products:	Floor, wall
Article type:	Natural stone adhesive
Base colour:	White
Brand:	PCI
Colour:	white
Container type:	Bag
Content (kg):	5
Curing time can be grouted after:	approx. 6 hours
Curing time can be walked on after:	approx. 6 hours
Curing time fully loadable after:	approx. 24 hours
Danger:	GHS05, GHS07
Execution of tile & natural stone laying products:	Cement adhesive
Fast curing:	True, true
Field of application:	Inside & outside
Flexible:	False, false
Glue open time:	approx. 15 minutes
Hazard:	H318,H315,H335
Manufacturer:	PCI
Processing temperature from (°C):	5
Processing temperature up to (°C):	25
Processing time:	approx. 1 hour
Reach:	6 mm = approx. 11.9 square metres, 8 mm = approx. 9.6 square metres, 10 mm = approx. 8.3 square metres
Suitability:	Natural stone, white marble, Solnhofer slabs, Jura marble