Corresponds to C2TE S1 according to DIN EN 12 004 and "Guideline for flexible mortar".
Adheres tiles and slabs, glass and porcelain mosaics, brick tiles and split clinker, tiles, plasterboard and gypsum fibre boards, dry screeds and mastic asphalt, cement screeds, anhydrite and gypsum flowing screeds.
For adhesive bed thicknesses from 1 to 10 mm.
Very low emission PLUS, GEV-EMICODE EC 1 PLUS R.
For the deformable bonding of tiles and boards.
For laying cement screeds with a residual moisture content < 4% CM
For laying ceramics on all PCI bonded waterproofing systems
For repairing and levelling minor unevenness on wall and floor surfaces before laying tiles and slabs
For laying on heated screeds.

Manufacturer "PCI Augsburg GmbH"

PCI Augsburg GmbH

Piccardstrasse 11
86159
Augsburg D
0821/5901-0
pci-info@pci-group.eu

Adhesive bed thickness of (mm):	1
Adhesive bed thickness up to (mm):	10
Area of application Tile & natural stone laying products:	Floor, wall
Article type:	Tile adhesive
Base colour:	Grey
Brand:	PCI
Colour:	grey
Container type:	Sack
Content (kg):	20
Curing time can be grouted after:	approx. 12 hours
Curing time can be walked on after:	approx. 12 hours
Curing time fully loadable after:	approx. 3 days
Danger:	GHS05, GHS07
Execution of tile & natural stone laying products:	Cement adhesive
Field of application:	Inside & outside
Flexible:	True, true
Glue open time:	approx. 30 minutes
Hazard:	H318,H315,H335
Manufacturer:	PCI
Processing temperature from (°C):	5
Processing temperature up to (°C):	25
Processing time:	approx. 3 hours
Reach:	4 mm = approx. 13.0 square metres, 6 mm = approx. 10 square metres, 8 mm = approx. 7.1 square metres, 10 mm = approx. 5.6 square metres
Suitability:	Ceramics, tiles, slabs