Highly deformable tile adhesive for all ceramic coverings

Areas of application:

interior, exterior, floor, wall
For covering cement screeds older than 3 days (as soon as they can be walked on)
Especially for laying large-format tiles on heated screeds
Especially for laying tiles and slabs outdoors; replaces the buttering-floating method
For laying ceramic tiles and slabs, porcelain mosaics, brick tiles, clinker bricks and porcelain stoneware.
For laying in swimming pools, pool surrounds, wet rooms and cold stores.
For laying on cementitious and gypsum-based substrates as well as hard foam carrier boards
For laying ceramics on PCI composite waterproofing and PCI decoupling membranes
For repairing and levelling minor unevenness on wall and floor surfaces before laying tiles and slabs

Product property:

Corresponds to C2TE S2 in accordance with EN 12004 and "Guideline for flexible mortar".
Stable, no sagging of heavy floor tiles.
highly deformable, equalises temperature fluctuations and substrate stresses.
High adhesive tensile strength, achieves twice the required adhesive tensile strength
Very low emission, GEV EMICODE EC1 Plus R.
Adhesive bed thickness 1 - 10 mm
Waterproof and temperature resistant from - 30 °C to + 80 °C

Consumption approx:
see consumption table

Manufacturer "PCI Augsburg GmbH"

PCI Augsburg GmbH

Piccardstrasse 11
86159
Augsburg D
0821/5901-0
pci-info@pci-group.eu

Adhesive bed thickness of (mm):	1
Adhesive bed thickness up to (mm):	10
Area of application Tile & natural stone laying products:	Floor, wall
Article type:	Tile adhesive
Base colour:	Grey
Brand:	PCI
Colour:	grey
Container type:	Sack
Content (kg):	20
Curing time can be grouted after:	approx. 12 hours
Curing time can be walked on after:	approx. 12 hours
Curing time fully loadable after:	approx. 3 days
Danger:	GHS05, GHS07
Execution of tile & natural stone laying products:	Cement adhesive
Field of application:	Inside & outside
Flexible:	True, true
Glue open time:	approx. 30 minutes
Hazard:	H315,H318,H335
Manufacturer:	PCI
Processing temperature from (°C):	5
Processing temperature up to (°C):	25
Processing time:	approx. 90 minutes
Reach:	6 mm = approx. 9.1 square metres, 8 mm = approx. 7.7 square metres, 10 mm = approx. 6.9 square metres, 10/20 mm = approx. 5.9 square metres
Suitability:	Tiles, slabs, ceramics, porcelain mosaic, brick tiles, clinker, porcelain stoneware