Knauf N 410 0-10mm 25kg gypsum-based floor filler

Knauf N 410 Gypsum-bound floor filler from 0 to 10 mm N 410 is a factory-made dry mortar... more

Knauf N 410
Gypsum-bound floor filler from 0 to 10 mm

N 410 is a factory-made dry mortar made from calcium sulphate, selected aggregate and additives to improve the processing properties, premixed ready for use. Mortar containing calcium sulphate, type CA-C25-F7 in accordance with EN 13813.

Properties:

Ideal for prefabricated screeds, e.g. B. Knauf Brio
Easy to sand
Can be applied in one step to a layer thickness of 0 to 10 mm
Very low emissions, EMICODE EC 1PLUS R
Very good flow
Very low tension
Suitable for use on heated screeds
Can be applied by machine and pumped
For indoor use

Area of application:

As a bonded leveling compound on raw concrete ceilings, load-bearing calcium sulphate and cement screeds and prefabricated screeds. For producing smooth, seamless floor surfaces, levelling out uneven floors and deviations from dimensional tolerances in accordance with DIN EN 18202 before laying ceramic tiles and slabs, marble and natural stone coverings, elastic coverings, carpets as well as parquet and laminate. For full-surface filling under parquet, the layer thickness must be at least 3 mm. As a leveling agent on properly sanded mastic asphalt surfaces of quality classes IC10 and IC15 up to 5 mm layer thickness. The requirements of DIN 18365 apply to floor covering work.

Einsatzbereich:	Innen
Serie:	N 410
Marke:	Knauf
Ausführung Spachtel:	Spachtelmasse
Art des Spachtels:	Pulverspachtel
Begehbar nach ca. von (h):	2
Inhalt (kg):	25
Schichtdicke von (mm):	0
Schichtdicke bis (mm):	10
Verarbeitungszeit bis (min):	30
Verbrauchshinweis:	je mm Schichtdicke
Verbrauch:	ca. 1,6 kg/m²
Anwendungsbereich Spachtel:	Boden
Artikelart:	Nivellierspachtel
Hersteller:	Knauf Gips