Select Deep Primer LF

Type of material Water-based primer, ready for use, solvent-free Area of application Outside and inside Color Dries transparent on a binder basis Finely dispersed synthetic resin dispersion Specific weight Approx. 1.0 +/- 0.1 Properties Solidifies the substrate and regulates absorbency Drying time Approx. 2 - 3 hours, can be painted over after approx. 4 - 5 hours, depending on temperature and weather Method of application Painting, spraying Processing temperature At least + 5 °C for air and substrate Material consumption 200 - 500 ml/m¬≤. The exact consumption, especially for large objects, should be determined by testing. Storage Cool, but frost-free Cleaning of tools Immediately after use with water Packaging 10 l System structure Particular attention should be paid to: VOB, Part C, DIN 18363 Substrate preparation The substrates must be clean, dry and load-bearing. Old coats of paint that do not adhere reliably must be completely removed. The substrates must be prepared in accordance with the guidelines for emulsion paints. Suitable substrates: outside and inside, all absorbent mineral substrates. Processing instructions ZERO Select deep primer LF is used to remove the absorbency of the substrate and to strengthen it. Film formation on the coating substrate must be avoided (the primer must not remain glossy). EU limit values for VOC content Category: hWb-30 g/l (2010) this product contains < 30 g/l VOC

Lagerung:	Kühl, jedoch frostfrei
Artikelart:	Tiefengrund LF 10l
Hersteller:	Zero-Lack

• Questions about the article?
• Hersteller
• Sicherheitsdatenblatt
• Technisches Merkblatt