The product

^PIXX®- Duo Sheet Lite is made of stainless steel, material no. 1.4301. The V-shaped spikes (spikes ø 1.6 mm) are welded onto a stainless steel strip every 50 mm. The strip is 17.5 mm wide and perforated 10 times for mounting purposes. The clear width of the spikes from tip to tip is 65 mm. The spike height is 110 mm. The entire strip is 1 m long. ^PIXX®- Duo Sheet Lite covers a landing area of approx. 115 mm.

The advantages

^PIXX®- Duo Sheet Lite is our "narrow" version ("wide" version see ^PIXX®- Quattro Sheet Lite). It is ideally suited for installation on window sills, balcony parapets, wall projections, railings or similar, wherever only areas of small width need to be covered. ^PIXX®- Duo Sheet Lite provides your property with optimum protection.

The principle

As ^PIXX® is made of stainless steel, rotting is almost impossible. This guarantees a long service life and gives you a visually attractive, clean image. ^PIXX® is easily recognisable by pigeons, making injuries unlikely.

The variant

As a variant to ^PIXX® - Duo Sheet Lite, we recommend the more stable version ^PIXX® - Duo Sheet. In contrast to the Lite version, this has a wire diameter of 2.0 mm and a base strip width of 20 mm. As a result, the "reset behaviour" of the spikes is more pronounced, i.e. the spikes offer greater resistance to the "chest bump" of the pigeon and are less easily bent.

The assembly

^PIXX® can be easily cut to the desired size using tin snips. ^PIXX®- Duo Sheet Lite can be fitted in one or more rows (over the entire surface) or combined with ^PIXX®- Quattro Sheet Lite. When installed over the entire surface, "flying behind" is prevented and it is impossible for pigeons to perch. ^PIXX®- Duo sheet metal can be attached either with screws or rivets via the holes provided in the moulding or simply with a suitable adhesive. Please note that the substrate must be dry and free of dust and grease before bonding; it may be advisable to prime the surface with a suitable primer.