The product

^PIXX®- Quattro Sheet Lite is made of stainless steel, material no. 1.4301. In contrast to ^PIXX®- Duo Sheet Lite, the V-shaped spikes (spikes ø 1.6 mm) are welded onto a stainless steel strip every 25 mm. The strip is 17.5 mm wide and perforated 10 times for mounting purposes. The clear width of the spikes from tip to tip is alternately 55 mm and 150 mm, spike height is 105 mm, strip length is 1 m. ^PIXX®- Quattro Sheet Lite covers a landing area of approx. 200 mm.

The advantages

^PIXX®- Quattro Sheet Lite is our "wide" version ("narrow" version see ^PIXX®- Duo Sheet Lite). It therefore covers a larger area to be protected, which means less labour is required during installation. ^PIXX®- Quattro Sheet Lite can also be perfectly combined with ^PIXX®- Duo Sheet Lite. The small spike spacing (25 mm instead of 50 mm) of ^{PIXX®-Quattro} Sheet Lite gives your object even better protection.

The principle

Since ^PIXX® is made of stainless steel, rotting is almost impossible. This guarantees a long service life and gives you a visually attractive, clean image. ^PIXX® is easily recognisable by pigeons, making injuries unlikely.

The variant

As a variant to ^PIXX® - Quattro Sheet Lite, we recommend the more stable version ^PIXX® - Quattro Sheet. In contrast to the Lite version, this version has a wire diameter of 2.0 mm and a base strip width of 20 mm. As a result, the "reset behaviour" of the spikes is more pronounced, i.e. the spikes offer greater resistance to the "chest bump" of the pigeon and are less easily bent.

The assembly

^PIXX® can be easily cut to the required size using tin snips. ^PIXX®- Quattro Sheet Lite can be fitted in one or more rows (over the entire surface) or combined with ^PIXX®- Duo Sheet Lite. When installed over the entire surface, "flying behind" is prevented and it is impossible for pigeons to perch. ^PIXX®- Quattro Sheet Lite can be attached either with screws or rivets via the holes provided in the moulding or simply with a suitable adhesive. Please note that the substrate must be dry and free of dust and grease before bonding; it may be advisable to apply a suitable primer.