Plinth insulation board 035
Base insulation board for all WARM-WAND systems

The plinth insulation board 035 with embossed surface for optimum bonding can be used in areas exposed to water spray and in contact with the ground.
It is optimally matched to the WARM-WAND systems. Application on existing building waterproofing, for installation depths up to max. 3 m.

Properties:

EPS according to DIN EN 13163
Application type PW according to DIN 4108-10
Fire behaviour B1
Thermal conductivity in the plinth area ? = 0.035 W/(mK)
Thermal conductivity in the ground ? = 0.039 W/(mK)
Bulk density approx. 30 kg/m³
Board dimensions: 500 x 1000 mm
Blunt edges
Special thicknesses > 200 mm with smooth surface for installation depth up to max. 0.5 m

Area of application:

Plinth insulation board for thermal insulation on old and new buildings at the plinth area in the splash water area, application on already
already installed structural waterproofing for installation depths up to max. 3 m. Not suitable for use in the capillary fringe of groundwater and in the area of pressing water.

Manufacturer "Knauf Gips KG"

Knauf Gips KG

Am Bahnhof 7
97346
Iphofen D
09323/31-0
zentrale@knauf.com

More products from Knauf Gips KG

Area of application Insulation materials:	Wall
Area of application Insulation materials according to DIN 4108-10:	PW
Article type:	Plinth insulation board
Brand:	Knauf
Coating Insulation materials:	No
Compressive stress (kPA):	150
ETICS:	Yes
Edge formation Insulation materials:	Stump
Fire protection class:	B1
Insulation material:	EPS (expanded polystyrene)
Length (mm):	1000
Manufacturer:	Knauf Gypsum
Nominal value of thermal conductivity ?D (W/mK):	.034
Rated value of thermal conductivity ? (W/mK):	.035
Rated value of thermal conductivity ? Perimeter (W/mK):	.041
Series:	Plinth insulation board 035
Thermal conductivity group:	WLG 035
Thickness (mm):	60
Use of insulating materials:	External wall insulation, facade insulation, plinth insulation, external thermal insulation composite system
Width (mm):	500